Savage 4 Driver for Windows 3.1 and Windows 3.11 Installation Instructions: 1. Copy all driver files to a diskette and place the diskette in you're A: drive. 2. From the MS-DOS command prompt, make your \WINDOWS subdirectory the default. 3. Run SETUP. 4. When SETUP displays its first panel, which describes your hardware configuration, use the cursor keys to highlight the line describing your video DISPLAY, and press the ENTER key. 5. Scroll to the bottom of the list of installed display drivers and highlight "Other." Press Enter. 6. SETUP will ask for the location of your driver disk. It will suggest A:\ by default. Since that's where your driver disk is, press ENTER. 7. Select the combination of resolution, color depth, and font size you prefer and press ENTER. 8. When SETUP completes the driver installation, start Windows.