INSTALLATION SECTION (NT)

1. Insert card (Details)

---------------------------------------------------------------------------

OVERVIEW: Windows NT should automatically detect the presence of the

33.6 Modem PC Card when it is inserted into the PCMCIA slot.

Details: From the Windows NT desktop:

   * Shutdown the system and power off

   * Insert the card

   * Bring up Windows NT

   * Double-Click "My computer"

   * Double-Click "Control Panel"

   * Double-Click "PCMCIA"

   * A window displaying the card name should appear.

   * Double-Click "PCMCIA 33.6/14.4 Modem"

   * Note the com port this modem is mapped to for use during

Modem installation..

2. Installing Modem (Details)

---------------------------------------------------------------------------

OVERVIEW: After Windows NT has detected the 33.6 Modem PC Card you will
need to install a new modem.

Details: From the Windows NT desktop:

   * Double-Click "My Computer"

   * Double-Click "Control Panel"

   * Double-Click "Modems"

   * Select the "Add.." tab

   * Select "don't detect my modem; I will select it from a list"
   * Click next

   * Select the "Have disk" tab

   * Insert the product diskette into your diskette drive
   * Ensure that drive selection (A:) is correct
   * Click "OK"

   * Select the "IBM PCMCIA 33.6+14.4 Data+Fax Modem"
   * Click next

   * Select the port your modem card is using.
   * Use the port you noted from above in Inserting card
   * Click next

   * Fill in your location information
   * Click next

   * Select "Finish" tab

This completes successful installation of the 33.6 Modem PC Card. For
further configuration of protocol stacks, modem application programs, and
so on, please refer to the documentation supplied by the application
vendor.

---------------------------------------------------------------------------

CELLULAR Section

---------------------------------------------------------------------------

The 33.6 Modem PC Card may be used in cellular mode with the additional of
a cellular upgrade kit and a cellular phone. The installation files that
come with the 33.6 Modem PC Card use default settings that should allow the
card to work with any cellular phone supported by your cellular upgrade
kit.

1. Consult the terminal application's (e.g. QuickLink II) users guide to
locate methods for updating the initialization string.

2. Add AT-sec=1,nn (nn = number of specific phone) to the end of the
initialization string.

This change will be required for each non-TAPI application.

          Phone (Make/Model #)            AT Commands     IBM Option Kit
                                                              Part #
 Mitsubishi 3500/4000, Diamondtel       AT&F1-SEC=1,17  41H7482
 20X/22x

 Motorola 8 pin flip (550)              AT&F1-SEC=1,10  41H7487

 NEC P110/P120/Talktime 180, AT&T 3610  AT&F1-SEC=1,14  41H7484

 NEC P700/P701                          AT&F1-SEC=1,16  41H8951

 OKI 1145/1150, AT&T 3760               AT&F1-SEC=1,10  41H7483

 Nokia 2120, AT&T 6650                  AT&F1-SEC=1,10  41H8950

 OKI 1300 series (1325/1335/1375)       AT&F1-SEC=1,10  41H8952

You may order these cellular option kits from IBM by calling

1-800-426-2968 and select OPTION Sales.

---------------------------------------------------------------------------

Inability to Select Cellular Protocol

---------------------------------------------------------------------------

Cellular protocol is grayed out if cellular phone is not attached when
setting advanced properties.

To select cellular protocol in Advance Connection Settings:

   * Attach Cellular phone
   * GO to Control Panel
   * GO to Modems and highlight the IBM PCMCIA 33.6+14.4 Data+Fax Modem
   * Select Properties
   * Select Advanced
   * Select cellular protocol