IBM ThinkPad February 15,1999 PC Card Feature for SelectaDock I/II Version 1.01 ========================================================================== ************************************************************************** WARNING THIS DRIVER CAN ONLY BE USED WITH THE MACHINES ON THE SUPPORTED LIST ON THIS PAGE. USE OF THESE DRIVERS WITH ANY OTHER MACHINE IS STRICTLY PROHIBITED. ************************************************************************** What This Package Does ----------------------- This package provides to enable hot insertion/removal of PC Card on SelectaDock I or SelectaDock II under Windows 98 environment. The following models are supported: - ThinkPad 600, 600E - ThinkPad 770, 770E, 770ED, 770X, 770Z Released Versions ----------------- Version 1.00 Initial Release Version 1.01 Support ThinkPad 600, 600E, 770X, 770Z Summary of Changes ------------------ Where: Package version (For example, 1.00.01 means Version 1.00.01) (New) New function or enhancement (Fix) Correction to existing function <1.01> - (Fix) At installation time of this driver, a meaningless operation was required. Who needs to install the PC Card Feature for SelectaDock I/II ? -------------------------------------------------------------- Windows 98 does not support PC Card slot in SelectaDock I/II. This driver enables you to use the PC Card slot under Windows98. Installation Procedure ---------------------- 1. Start Windows 98. 2. Extract the drivers onto the hard drive. 3. Click on 'Start' -> 'Settings' -> 'Control Panel'. 4. Specify SETUP.EXE with the full path name where you unpacked the driver files and press Enter. Default path is C:\DRIVERS\W9X\PCCARD\. 5. Open "Add New Hardware" and click "Next" twice. 6. If Windows 98 shows device list, select "No" and click "Next". 7. Select "No" and click "Next" since this driver should be manually installed. 8. Select "System devices" and click "Next". 9. Click "Have Disk ...". 10. Open the directory that this package is extracted. Default path is C:\DRIVERS\W9X\PCCARD 11. Windows 98 shows this driver name "PC Card Feature for SelectaDock I/II". Then click "Next". 12. Follow Windows 98 messages. And reboot the system. Uninstall procedure ------------------- 1. Make sure all of PC Cards are removed from PC Card slots on system and docking station. 2. Open "Control Panel". 3. Open "System" and click "Device Manager" tab. 4. Click "System" and select "PC Card Feature for SelectaDock I/II". 5. Click "Remove" button. 6. Reboot the system. What files are contained in this package ? ------------------------------------------ tpssctrl.vxd - The driver. ibmtphw.inf - An INF file needed to install this driver. Known Limitations ----------------- 1. CardBus cards do not work in SelectaDock I/II. 2. IRQ 3 and 4 are not usable for PC Cards in SelectaDock I/II. 3. RI resume is not supported in SelectaDock I/II. 4. Unattended install is not supported. 5. Hot/Warm undock is not supported. The system should be shut down when being removed from the SelectaDock I/II. 6. Suspend/Hibernation is not supported. You should not enable suspend or hibernation with SelectaDock I/II. ( Keep "Suspend/Hibernate while docked" unchecked in ThinkPad Utility. ) Trademarks ---------- IBM and ThinkPad are trademarks of IBM Corporation. Windows is a trademark of Microsoft Corporation.