Microsoft Windows NT 3.51 Support on IBM ThinkPad Systems ======================================================== Version 1.40 October 25, 1996 This document contains information to assist you in using Microsoft** Windows** NT operating system on IBM* ThinkPad systems. * Trademark of IBM Corporation ** Trademark of Microsoft Corporation IBM Personal Computer Company ----------------------------------------------------------------------- Table of Contents ================= 0.0 What's new in this release 1.0 Before installing Windows NT Workstation V3.51 1.1. How to get the updated software from IBM 1.2. Backing up your software and data 1.3. Removing preinstalled software 1.4. Before installing Windows NT Workstation 2.0 Install and Setup Windows NT 3.51 on ThinkPad 2.1.0 Before you proceed 2.1.1. During Windows NT Workstation V3.51 installation 2.1.2. Install ThinkPad 345C/370C/750C/755 NT 3.51 Display Driver 2.1.3. Install ThinkPad 760/365X/560 Family NT 3.51 Display Driver 2.1.4. How to use video driver with your external CRT monitor 2.1.5. Install Windows NT 3.51 PCMCIA Token Ring Device driver 2.1.6. Using Windows NT ThinkPad Features Program 2.1.6.1 Installing the ThinkPad Feature 2.1.6.2 ThinkPad Features Usage Note 2.1.6.2.1 Consideration of Suspend/Resume on ThinkPad 2.1.6.2.2 FDD Drive/CD-ROM drive warm swapping on 760E 2.1.6.3 ThinkPad Features for 345C/370C 2.1.7. Using Windows NT 3.51 Audio Driver for ThinkPad 760L/760EL/365X/560 2.1.8. Using Windows NT 3.51 on ThinkPad 345C/370C 2.1.9 Using ThinkPad Mwave/DSP Features on Windows NT 3.51 2.1.9.1 Installing Mwave for Windows NT 3.51 2.1.9.2 Configuring the Mwave modem 2.1.9.3 Tips for Mwave/DSP Feature program 3.0. Known limitations with Windows NT 3.51 ----------------------------------------------------------------------- ------------------------------- 0.0 What's new in this release ------------------------------- This release (ver 1.40) has the following updates since last release: - Updated section 2.1.3 since 760/365X/560 Display Driver is updated - Updated section 2.1.6 since ThinkPad Feature is updated to support power management feature, other new function - Updated section 2.1.7 to update the ESS audio driver including the power management feature - Updated section 2.1.9 to support the power management feature in Mwave device driver. - Updated section 3.0 --------------------------------------------------- 1.0 Before installing Windows NT Workstation V3.51 --------------------------------------------------- 1.1. How to get the updated software from IBM --------------------------------------------- Before you install Windows NT Workstation on your ThinkPad, you may need to get some updated software from IBM or Microsoft. IBM PC Company is providing the updated software through several channels as follows. It is suggested you get the latest software from those channels so that you can set up Windows NT on your ThinkPad systems with the information described in this document. The home page for IBM PC Company file library index for Windows NT is; http://www.pc.ibm.com/support/tps/tpwnt.html Click "Software Updates" to find the necessary Windows NT files. The IBM PC Company FTP server address for mobile product software fixes and patches is; ftp://ftp.pc.ibm.com/pub/pccbbs/mobiles Join CompuServe ThinkPad Forum (GO THINKPAD) and download the necessary software from the library. Use a terminal emulation software and modem to connect the IBM PC Company BBS in the US. The phone number is: 919-517-0001. If you cannot get the updated software from either one, please contact your IBM representative, or contact IBM HelpCenter (1-800- 772-2227 in the US) for more information. 1.2. Backing up your software and data -------------------------------------- IBM recommends that you use a diskette backup program on your system to create recovery diskettes of the preinstalled operating systems, device drivers and applications. In addition, IBM recommends that you back up all data files to diskettes before installing Windows NT Workstation. 1.3. Removing preinstalled software ----------------------------------- If you purchase a SelectaSystem model and are using OS/2 Warp version 3, Windows NT cannot be installed with OS/2 Warp dual boot configuration in the SelectaSystem. Therefore, if you wish to install Windows NT, OS/2 Warp should be removed from your system along with all the preinstalled OS/2 applications. If you wish to continue using OS/2 Warp with Windows NT, you need to use OS/2 Warp Boot Manager. For more information, refer to Windows NT Installation Guide. 1.4. Before installing Windows NT Workstation ---------------------------------------------- Before you install Windows NT Workstation, it is recommended that you review the information which is available in the Windows NT installation guide. You can install Windows NT Workstation using SCSI CD-ROM in IBM DOCK-I/DOCK-II or the built in CD-ROM if your ThinkPad has the built-in CD-ROM. ----------------------------------------------------------------------- -------------------------------------------------- 2.0. Install and Setup Windows NT 3.51 on ThinkPad -------------------------------------------------- 2.1.0. Before you proceed ------------------------- You need to get the following updated software before installing Windows NT Workstation V3.51 on your ThinkPad. Necessary: o Microsoft Windows NT Workstation 3.51 and the latest Service Pack o Windows NT 3.51 Display Device Driver V1.00 for 345C/370C/750/755 Family --> Download VF75XWNT o Windows NT 3.51 Display Device Driver V1.10 for 760/365X/560 Family --> Download HXD405US o Windows NT 3.51 IBM PCMCIA Token Ring Device Driver V1.00, --> Download TRCC1 o Windows NT ThinkPad Utility Diskette V1.00 for ThinkPad 370C/345C/755CE/ 755CD/755CX --> Download UTTPGWNT o Windows NT ThinkPad Power Management Support Diskette V1.00 for ThinkPad 755CE/CD/CX/CDV --> Download HXS201WW o Windows NT ThinkPad Utility Diskette V3.50 for ThinkPad 760 family/365X Family and 560 --> Download HXU315US o Windows NT 3.51 ESS Audio Driver Diskette V1.00, for ThinkPad 760L/760LD/760EL/760ELD/365X/365XD/560 --> Download HXA403WW o Windows NT 3.51 NTDETECT.COM Patch Diskette for ThinkPad 370C/345C --> Download TPNTDTCT o Windows NT Mwave/DSP Feature Diskette V2.00 for ThinkPad 755CE/755CD/755CX/760C/760CD/760E/760ED user --> Download the following files: TBN241B1 DSP/Mwave Driver Install Disk 1 of 2 TBN241B2 DSP/Mwave Driver Install Disk 2 of 2 And Mwave MIDI Sample file diskettes MWMIDIW1 MIDI Sample disk install Disk 1 of 6 MWMIDI-2 MIDI Sample disk install Disk 2 of 6 MWMIDI-3 MIDI Sample disk install Disk 3 of 6 MWMIDI-4 MIDI Sample disk install Disk 4 of 6 MWMIDI-5 MIDI Sample disk install Disk 5 of 6 MWMIDI-6 MIDI Sample disk install Disk 6 of 6 Following tables shows the summary of the device drivers required for Windows NT 3.51 on various ThinkPad models. o : Applicable device drivers for this model - : Not applicable device drivers for this model +-------------------------------------------------------------------------+ !ThinkPad !Driver ! 760ED! 760CD! 365XD! 560 !755CX ! !Model Name !File Name ! 760E ! 760C ! 365X ! !755CE ! ! ! ! ! ! ! !755CD ! ! ! ! ! ! ! !755CDV! !--------------------------!------------!------!------!------!-----!------! !MWAVE/DSP Driver V2.00 ! TBN241B1 ! o ! o ! - ! - ! o ! ! ! TBN241B2 ! o ! o ! - ! - ! o ! ! ! ! ! ! ! ! ! !MWave MIDI Sample Files ! MWMIDIW1 ! o ! o ! - ! - ! o ! ! ! MWMIDI-2 ! o ! o ! - ! - ! o ! ! ! MWMIDI-3 ! o ! o ! - ! - ! o ! ! ! MWMIDI-4 ! o ! o ! - ! - ! o ! ! ! MWMIDI-5 ! o ! o ! - ! - ! o ! ! ! MWMIDI-6 ! o ! o ! - ! - ! o ! ! ! ! ! ! ! ! ! !NT 3.51 ESS Audio Driver ! HXA403WW ! - ! - ! o ! o ! - ! !V1.00 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !ThinkPad Utility V1.00 ! UTTPGWNT ! - ! - ! - ! - ! o ! !for 755/370C/345C family ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !ThinkPad Utility V3.5 ! HXU315US ! o ! o ! o ! o ! - ! !for 760/365X/560 family ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !Power Management driver ! HXS201WW ! - ! - ! - ! - ! o ! !V1.00 for 755 family ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !NT 3.51 Display Driver ! HXD405US ! o ! o ! o ! o ! - ! !V1.10 for 760/365X/560 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !NT 3.51 Display Driver ! VF75XWNT ! - ! - ! - ! - ! o ! !V1.00 for 755/345C/370C ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !NT 3.51 IBM PCMCIA Token ! TRCC1 ! o ! o ! o ! o ! o ! !Ring driver, V1.00 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! +-------------------------------------------------------------------------+ +------------------------------------------------------------+ !ThinkPad !Driver !760EL ! 760L !370C/ ! !Model Name !File Name !760ELD! 760LD!345C ! ! ! ! ! ! ! !--------------------------!------------!------!------!------! !MWAVE/DSP Driver V2.00 ! TBN241B1 ! - ! - ! - ! ! ! TBN241B2 ! - ! - ! - ! ! ! ! ! ! ! !MWave MIDI Sample Files ! MWMIDIW1 ! - ! - ! - ! ! ! MWMIDI-2 ! - ! - ! - ! ! ! MWMIDI-3 ! - ! - ! - ! ! ! MWMIDI-4 ! - ! - ! - ! ! ! MWMIDI-5 ! - ! - ! - ! ! ! MWMIDI-6 ! - ! - ! - ! ! ! ! ! ! ! !NT 3.51 ESS Audio Driver ! HXA403WW ! o ! o ! - ! !V1.00 ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! !ThinkPad Utility V1.00 ! UTTPGWNT ! - ! - ! o ! !for 755/370C/345C family ! ! ! ! ! ! ! ! ! ! ! !ThinkPad Utility V3.5 ! HXU315US ! o ! o ! - ! !for 760/365X/560 family ! ! ! ! ! ! ! ! ! ! ! !Power Management driver ! HXS201WW ! - ! - ! - ! !V1.00 for 755 family ! ! ! ! ! ! ! ! ! ! ! !NT 3.51 Display Driver ! HXD405US ! o ! o ! - ! !V1.10 for 760/365X/560 ! ! ! ! ! ! ! ! ! ! ! !NT 3.51 Display Driver ! VF75XWNT ! - ! - ! o ! !V1.00 for 755/345C/370C ! ! ! ! ! ! ! ! ! ! ! !NT 3.51 IBM PCMCIA Token ! TRCC1 ! o ! o ! o ! !Ring driver, V1.00 ! ! ! ! ! ! ! ! ! ! ! !NT 3.51 NTDETECT.COM Patch! TPNTDTCT ! - ! - ! o ! !diskette ! ! ! ! ! +------------------------------------------------------------+ 2.1.1. During Windows NT Workstation V 3.51 installation --------------------------------------------------------- - Install Windows NT with the "Customer Setup" option and specify the video display as: "Standard VGA (640x480, 16 colors)" during the installation. ================================= If you chose "Express Setup," Windows NT sets "VGA or Compatible" as the display adapter type which may cause the screen black out problem on ThinkPad 760/365X Family. You will have to delete the \SYSTEM32 directory under the directory where you installed NT and repeat the installation process as described above in order to correct this problem. - If you need to use PCMCIA Hard Disk drives such as IBM 105 MB/260 MB Hard Disk drive, Integral Peripherals Viper 105 /260 MB disk, Maxtor Mobile Max131 and the other PCMCIA ATA storage devices, you are required to insert the device in the PCMCIA slot before you start Windows NT installation. ====== Windows NT only recognizes the PCMCIA Hard Disk at installation time to set up the necessary device driver. 2.1.2. Install ThinkPad 345C/370C/750C/755 Family NT 3.51 Display Driver ------------------------------------------------------------------------ The standard video driver included in Windows NT only support up to 16 colors. When you need a color depth more than 16 colors, you are required to install the Windows NT video drivers as follows: - ThinkPad 750/755 Family Windows NT 3.51 Video Device Driver Diskette (VF75XWNT) supports the following resolution/color depth: 640x480 256 colors (LCD mode, LCD/CRT mode, CRT only mode) 800x600 256 colors,(LCD mode and LCD/CRT both mode for 755CX, CRT mode only for the other 750/755 Family) 1024x768 256 colors (CRT mode only) Installation Instruction: ------------------------- 1. Boot Windows NT 3.51 Workstation and logon to the system. 2. Click "Command Prompt" at Main menu 3. Type the following command at DOS session: A:>install C:\WINNT35 (enter) C:\WINNT35 is the drive and path where Windows NT is installed. Specify your drive/path name where you installed Windows NT. 4. When files are copied, go back to Program Manager - Main 5. Click "Display"on Control Panel, click "Change Display Type..." 6. At Adapter Type, click "Change..." and Select the following adapter at Select Device list "Western Digital Graphics Adapter" 7. Click "Install" and follow the instruction on the screen 8. When installation completes, shutdown and restart Windows NT 9. Click "Display", select 16 colors or 256 colors in "Color Palette" 10. Click "Test" to make sure that the selected color depth is set correctly. 11. Shutdown and Restart Windows NT to finish the setup for SVGA. Notes: 1. This video driver supports 256 colors for TFT model ThinkPad such as for ThinkPad 345C/370C/755C/755CE/755CX/755CD/755CV/755CDV. 2. DSTN model of ThinkPad such as 750Cs/755CSE support 256 colors only with 640x480 resolution for LCD mode, CRT mode or LCD/CRT mode. When you use external CRT, it allows you only with 640x480 resolution. 3. Western Digital miniport driver (WDVGA.SYS) included in this driver diskette is exactly the same one available in Windows NT 3.51 Service Pack #4. 2.1.3. Install ThinkPad 760/365X/560 Family NT 3.51 Display Driver ------------------------------------------------------------------ The standard video drivers included in Windows NT only support up to 16 colors. When you need a color depth more than 16 colors, you are required to install the Windows NT 3.51 video drivers as follows: - ThinkPad Family Windows NT 3.51 Display Device Driver supports: 640x480 256/64K colors 16 M colors 800x600 256/64K colors 16M colors (760ED only) 1024x768 256 colors 64K colors (760E XGA model only) 1280x1024 16 colors 256 colors (760E only with CRT only mode) Installation Instruction: 1. Boot Windows NT Workstation and logon the system. 2. Click "Control Panel", Click "Display" 3. At Display Setting menu screen, click "Change Display Type..." Click "Change" at Display Type menu 4. Click "Other.." at Select Device menu screen. Insert the display driver diskette in the floppy drive. 5. You will see the display devices in the selection list. Chose the device from the following list and click "Install" button. "IBM ThinkPad (Cyber 9320/9385/9382)" Select this driver for all ThinkPad 760/365X/560 series. (ThinkPad 760C/760CD/760L/760LD/760E/760ED/760EL/760ELD/365X/365XD/560) 6. Restart Windows NT after installation and you will be ready to use the display with SVGA mode. 7. After rebooting Windows NT, display resolution is set to: 640x480/256 colors as the default. Change the resolution/refresh rate to the other value you need. To do this: - Go to Control Panel, click Display - At Display setting menu screen, click "List All Modes" and chose the one required. - Click "Test" button and make sure the selected mode is displayed correctly - Reboot NT once again to take the changes effect 2.1.4. How to use display driver with your external CRT monitor ---------------------------------------------------------------- After you install the Windows NT display driver, take the following steps to configure to use with your external CRT monitor. 1. Boot Windows NT Workstation. 2. When "OS Loader 3.51" screen appears to select the operating system to start, change the screen to CRT only mode by pressing Fn+F7 key. When your ThinkPad is 345C/370C/750C/755C, changing the screen mode from LCD to external CRT only works at this OS Loader screen. Fn hot key will not work once you have started Windows NT if your ThinkPad is 345C/370C/750C/755C. 3. Proceed to log-on Windows NT. Windows NT is started on the CRT screen 4. When Windows NT is started, click "Display" on "Control Panel" 5. On Display Settings menu, select high resolution mode (800x600, 1024x768) and Refresh Frequency by clicking "List All Modes". 6. Click "Test" to make sure that your CRT monitor can display correctly. 7. If the selection is all right, Windows NT will ask you to reboot the system. 8. After rebooting Windows NT, it is ready to use with your external CRT. < Note > A. If you install the Windows NT ThinkPad Feature program, you can switch the display mode to CRT only mode, CRT/LCD simultaneous mode and LCD only mode on the "Display" menu of the ThinkPad Features Program. B. If your CRT monitor displays with much of flicker noise or screen image is unstable, you can adjust the monitor refresh rate as follows: Using ThinkPad Feature Program - Display Advanced Setup Menu , specify the SVGA monitor type of yours and select the appropriate "Refresh Rate" and click "OK" to adjust with your right monitor type. C. If your computer is ThinkPad 760CD and MPEG/Enhanced Video Feature is enabled, maximum resolution is forced to 800x600. If you need to set the resolution of 1024x768 on CRT, disable MPEG/Enhanced Video Feature using ThinkPad Utility. MPEG/Enhanced Video Feature is enabled as the machine default setting but this MPEG/Enhanced Video Feature is not available on Windows NT environment. Notice for using external CRT on ThinkPad 345C/370C/755CE/CX/CD/CV/CDV: -------------------------------------------------------------------- Dynamic resolution change between CRT and LCD and virtual screen function are not supported. If you use with 1024x768 CRT only mode and switch from CRT mode to LCD mode (640x480 resolution) for example, screen image will be forced to 640x480 resolution. Switching back to CRT only mode again stays with 640x480 resolution on CRT. To restore to 1024x768, go to Display Settings menu on WindowsNT control panel, select "Test" button to display with the previous resolution as the recovery step. 2.1.5. Install Windows NT 3.51 PCMCIA Token Ring device driver --------------------------------------------------------------- Windows NT 3.51 comes with the integrated PCMCIA support for some PCMCIA devices. The PCMCIA device driver included in Windows NT does not support IBM 16/4 Token Ring CCA, IBM 16/4 Token Ring CCA/II and IBM Auto 16/4 PCMCIA Token Ring card. When you use these Token Ring cards, you need to install the IBM PCMCIA Token Ring Device Driver. Installation Instruction: Note: Before you install this driver, you have to install Windows NT Service Pack #2 or later. 1. Click on Main in the Program Manager Screen. 2. Click on Control Panel on the Main Screen. 3. Click on Network on the Control Panel Screen. 4. Click on Add Adapter the Network Settings Screen. At this point in time, Windows NT prepares a list of Network adapters it supports. Click on the dropdown list icon. This displays a list of these adapters. Scroll to the bottom of the list to the entry that says: " Requires disk from manufacturer". Click on this entry. You will be prompted for a diskette. Place the diskette with the driver into diskette A:. Follow the instructions on the screen. 5. When you are through adding the adapter, Click on OK and follow the instructions on the screen. 2.1.6. Using Windows NT ThinkPad Features Program ------------------------------------------------- The Windows NT ThinkPad Feature program let you to configure the ThinkPad. Using this program, you can change your hardware configuration, know the remaining battery hour, suspend/resume the system and so on just as you do in the Windows 3.1 or Windows 95 environment. 2.1.6.1 Installing the ThinkPad Feature --------------------------------------- To install this program, follow the instruction below. o If your ThinkPad is 370C/345C or 755C series of ThinkPad, download ThinkPad Utility V1.00. If your model is 755CE/CD/CX/CDV/CV, you can also install Windows NT Power Management Driver V1.00. Install instruction for 370C/345C/755CE/CD/CV/CVD/CX series of ThinkPad ----------------------------------------------------------------------- 1-1 Start Windows NT 3.51 on your ThinkPad 1-2 If your ThinkPad is 370C/345C, skip step 1-2, 1-3 and goto step 1-4. If your ThinkPad is 755CE/CD/CX/CV/CDV, install the power management driver as follows: Insert ThinkPad Power Management driver diskette into your floppy drive (A:). Click "File" on Program Manager and click "Run..." 1-3 Enter "A:\PMINSTN" to run this program. ThinkPad Power Management device drivers are installed in your system. 1-4 Insert ThinkPad Utility Diskette into your floppy drive (A:). Click "File" on Program Manager and click ""Run..." 1-5 Enter "A:\INSTDRV.EXE" to run this program. ThinkPad Feature NT device driver is installed in your system. When this driver is installed, following message appears on the NT DOS screen session. "Installation complete for ThinkPad Feature NT driver. Shutdown and restart Windows NT. Run INSTALLN to install ThinkPad Feature program after Windows NT is started." < Note > If you have already installed an old version ThinkPad Features and are running Fuel Gauge program, close fuel gauge program before installing the device driver. If not, "DLL load error" message will appear. 1-6 Shutdown and restart Windows NT. Insert this Utility Diskette again into floppy drive and click "File" and click "Run..." 1-5 Enter "A:\INSTALLN.EXE" to proceed to install the ThinkPad Feature program. Follow the instructions on the screen. 1-6 Logoff Windows NT and logon again to start using ThinkPad Feature program. Fuel Gauge program icon will be automatically started after you will logon the Windows NT. o If your ThinkPad model is either 760,365X or 560 family, Install ThinkPad Utility V3.50 Diskette. Install instruction for 760C/760CD/760L/760LD/760E/760ED/760EL/760ELD/365X/ 365XD/560 ---------------------------------------------------------------------------- 1-1 Start Windows NT 3.51 on your ThinkPad 1-2 Insert ThinkPad Utility Diskette into your floppy drive (A:). Click "File" on Program Manager and click ""Run..." 1-3 Enter "A:\INSTALLN.EXE" to proceed to install the ThinkPad Feature program. Follow the instructions on the screen. Power Management driver as well as ThinkPad Utility program will be automatically installed into your hard disk. 1-4 Logoff Windows NT and logon again to start using ThinkPad Feature. 2.1.6.2 ThinkPad Features Usage Note ------------------------------------ This section describes how to use the ThinkPad Features, Fuel Gauge Program and Personalization Editor. Refer to ThinkPad Features Online Help for the general information. This section contains some unique information associated with the Windows NT environment which is not included in the Online Help. ThinkPad Feature support the following function depends on your system you use. Supported Function Applicable ThinkPad Models --------------------------- ------------------------------------------ Device Configuration and All ThinkPad model Setup Fuel Gauge monitor All ThinkPad model Personalization Editor All ThinkPad model Suspend/Resume ThinkPad 755CE/CD/CX/CV/CDV Power Management All 760/560/365X Family Diskette Drive/CD-ROM drive 760E/760ED/760EL/760ELD only Warm swap in Ultra bay 2.1.6.2.1 Consideration of Suspend/Resume on ThinkPad ----------------------------------------------------- Suspend/Resume feature is supported on most of ThinkPad models under Windows NT once you install the ThinkPad Utility or power management driver. However, if the system is connected to the docking station or if some PC Card is inserted in the PCMCIA slot, the suspend operation will set the system going into STANDBY mode when the system is used with AC mode operation. This is to avoid the problems such as communication link break or failure when the system is operational with the network environment. 2.1.6.2.2 FDD Drive/CD-ROM drive warm swapping on 760E ------------------------------------------------------ This feature is supported only for 760E/760ED/760EL/760ELD models. In order to use this function, you must install Windows NT PIIX IDE device driver that is contained in the ThinkPad Utility Disk. Installing the ThinkPad PIIX IDE driver --------------------------------------- 1. Boot Windows NT 3.51 on your computer. 2. Close any running applications. 3. From the Program Manager, double click on "Windows NT Setup" in the "Main" group. 4. Select "Options"!"Add\Remove SCSI Adapters" from the menu bar. 5. From the "SCSI Adapter Setup" dialog box, click on the "Add..." button to add a new driver. 6. Setup will show a message box explaining how to recover from a bad installation. Select the "OK" button. 7. The "Select SCSI Adapter Option" dialog box will appear; select "Other (Requires a disk from a hardware manufacturer)" from the "Adapter:" list box. 8. Next, the "Insert Diskette" dialog box will appear; insert the installation diskette into drive A:> (default). NOTE: If the installation files are located elsewhere, it will be necessary to specify the appropriate path to these files in the text box. Press to continue. 9. The "Select OEM Option" dialog box will appear; select "IBM ThinkPad PIIX IDE Driver" and click "OK" . 10. The "Select SCSI Adapter Option" dialog box will reappear with "IBM ThinkPad PIIX IDE Driver" now appearing in the "Adapter:" list box. Click on the "Install" button. 11. The "Windows NT Setup" dialog box will appear prompting for the path of the installation files. Enter the path for the installation files; the default is "A:\". Click on the "Continue" button. 12. If installation was successful, the "SCSI Adapter Setup" dialog box will reappear, and "IBM THinkPad PIIX PIIX IDE" will be listed. 13. Select "Close" to exit "SCSI Adapter Setup", exit "Windows NT Setup". 14. Windows NT prompts you to restart your computer before the new settings will take affect. Click "No" to proceed for the next step. After installation, the PIIXIDE.SYS file is stored in the c:\\System32\Drivers directory. Next step is to setup warp swap option that should be proceeded with the following two steps: TPFDD.EXE and TPSWAP.EXE are provided to support this feature. These two programs are included in the ThinkPad Utility Disk. Setup Warm Swap Options ----------------------- 1. Activate the internal FDD drive in Ultra Bay as the primary drive When the system is booted without FDD drive mounted in the Ultra Bay, external FDD is assumed as the active FDD port. To change the active FDD port to be assigned for the Ultra Bay FDD port regardless of the actual drive presence, one utility command is required to run. Enter "TPFDD.EXE I" from the DOS command prompt. This enables the FDD port always active in the Ultra Bay side. This command is required only once as long as you keep using the FDD or CD-ROM in the Ultra Bay. If you want to reset this setting to the default value enabling to activate the external FDD port, Enter "TPFDD.EXE E" on the DOS command prompt. 2. Set the Warm Swap Option Type "TPSWAP.EXE E" from the command prompt. This enables the warm swap feature. If you want to disable this feature, type "TPSWAP.EXE D". The default mode is disable the warp swap feature. Note that you must restart the Windows NT to make this warm swap feature effective. 2.1.6.3 ThinkPad Features for 345C/370C --------------------------------------- This section applies only for ThinkPad 345C/370C since power management feature is not supported. Fuel Gauge program suspend icon on 345C/370C -------------------------------------------- On the fuel gauge screen, clicking the "suspend icon" must not be used to avoid the erroneous situation on Windows NT. Setting the system to go into suspend mode will cause erroneous situations on Windows NT such as delay of time of day clock during suspend and erroneous power down for certain devices after resuming the system. If you use sound device, PCMCIA devices, and timer device for example, suspend the system will not restore the device context after resume. There is a "hibernation" icon on the same menu but using the hibernation function is NOT recommended because of the same reasons as suspend. Suspend/Resume options at power mode setting -------------------------------------------- If you set "Will not suspend even if LCD is closed" as an option at Suspend/Resume options on power mode icon menu, this option is used in the following manner in a Windows NT environment: This option allows not only inhibiting the suspend operation if the LCD is closed, but also inhibits ANY suspend condition such as Fn+F4 suspend key, suspend selection at battery gauge icon menu, automatic suspend with suspend timer and low battery suspend. To set this mode effective, click this option on the menu and "save" it. Then shutdown and restart NT. When you boot NT, this mode becomes effective. WARNING: YOU MUST MANUALLY SHUTDOWN THE SYSTEM WHEN LOW BATTERY CONDITION OCCURS. THE SYSTEM WILL NOT GO TO SUSPEND AUTOMATICALLY AT LOW POWER BATTERY. Inhibiting suspend operation ---------------------------- You can inhibit the automatic timer suspend operation using the "Power" mode menu on ThinkPad Features. Unless you specify "Will not suspend even if LCD is closed" option at suspend/resume option, it is required at least to set the following power mode in order to avoid going to suspend: - Set the "Power Mode" to "Customized" - Set the "Suspend time" to "0" (disable timer suspend) Save the above option in the Power Mode menu. - Click "Fuel gauge" icon to open the fuel gauge program - Double click the "Current Power Mode" icon until power mode icon changes to "Customized" mode. Customized power mode is now becomes effective. Disabling automatic suspend will avoid the erroneous situation occurring on Windows NT. This is minimum thing that should be done in order to avoid automatic suspend either in AC power mode or battery power mode. 2.1.7. Using Windows NT 3.51 Audio Driver for ThinkPad 760L/760EL/365X/560 -------------------------------------------------------------------------- This diskette contains the Windows NT 3.51 ESS Audio device driver for IBM ThinkPad 760L/760LD/760EL/760ELD/365X/365XD/560. Using this audio driver diskette, you may be able to play back or record the WAVE/MIDI audio function on Windows NT 3.51 . Installing NT 3.51 ESS Audio Driver ----------------------------------- NOTE: Before installing this audio driver, it is recommended to install ThinkPad Feature Program Version 3.50 for power management feature enabled. To install this audio disk, follow the steps below. 1. Start Windows NT 3.51 on your ThinkPad 2. Goto "Main", click "Control Panel" and click "Drivers" 3. At install driver menu, click "Add..." and select "Unlisted or Updated Driver" on the Install Driver menu 4. Specify drive/path name as "A:" then chose "OK" 5. Select "ESS1688 AudioDrive 1.05.01" as the driver and chose "OK" 6. Select ESS Base I/O address Most of the times, choose ThinkPad default setting: I/O address : 220 Select "OK" to continue 8. Installer will ask you to restart Windows NT. Shutdown and restart Windows NT. 9. When you start Windows NT, you will be ready to use ThinkPad audio function. Changing the Default Setting ---------------------------- If you need to change the default setting of ESS audio resources such as Interrupt number, DMA channel and I/O base address, make sure that the selected values matches with the one set by the ThinkPad Feature Program. ThinkPad Feature allows you the following alternative setting for the each resources: Base I/O Address: 220 or 240 (220 is default) Interrupt : 5 , 7 or 10 (5 is default) DMA channel : 1 or 0 (1 is default) To change the default setting, follow the next steps: - Go to ThinkPad Feature program - Change the default setting using the ThinkPad Feature - Shutdown and reboot Windows NT Playback and Recording ----------------------- You may be able to record or play back the WAVE file or play back MIDI sounds using "Sound Recorder" or "Media Player" available in the "Accessories" group under Windows NT. For more information, refer to Microsoft Windows NT Workstation System Guide. To enable suspend/resume feature for audio driver ------------------------------------------------- In order to allow the suspend/resume function on Windows NT, it is required to install the latest Windows NT ThinkPad Feature Program. 2.1.8. Using Windows NT 3.51 on ThinkPad 345C/370C -------------------------------------------------- When you use ThinkPad 345C or 370C, special consideration is required to run Windows NT Workstation V3.51. During/after installing Windows NT on these machines, diskette drive does not work on these system. To be able to use FDD drive, you must replace NTDETECT.COM file which fix this problem. To replace the file, take the following steps: Replacing NTDETECT.COM ---------------------- 1. If you install Windows NT using Windows NT Setup Boot Disk, the original NTDETECT.COM should not be used. Make the back up copy of the original disk and overwrite with new NTDETECT.COM which should be located in the root directory of the Setup Boot Disk. 2. During the installation of Windows NT, you may continue to install using Windows NT CD-ROM. In this case, the original NTDETECT.COM is copied to NT install drive even if Setup Boot Disk has new NTDETECT.COM. In this case, take the following to steps. 3. Original NTDETECT.COM is read only, hidden system file located in the root directory of the NT install drive. Use ATTRIB command to change the file attribute to change the file attribute: ATTRIB -r -h -s NTDETECT.COM 4. Copy the new NTDETECT.COM to overwrite. Restart Windows NT. Note: If you copy the new NTDETECT.COM from the diskette drive, you must boot the system with DOS. If you run NT, you can not access floppy drive to do this. 2.1.9 Using ThinkPad Mwave/DSP Features on Windows NT 3.51 ----------------------------------------------------------- On Windows NT Workstation 3.51, Mwave/DSP Features are supported on DSP featured ThinkPad models, 755CE/755CD/755CX/755CDV/760C/760CD/760E/760ED. Using Windows NT Mwave Feature program, you may be able to use Mwave Modem Function for 28.8K Data modem, run FAX application, MIDI/Mwave Sound multimedia application, CD-Audio playback function under Windows NT Workstation. 2.1.9.1 Installing Mwave for Windows NT 3.51 --------------------------------------------- o If you use Windows NT Remote Access Service (RAS), RAS must be installed first BEFORE Mwave NT driver is installed. When Mwave driver is installed, RAS original MODEM.INF file is updated by Mwave installer. So, make sure that RAS installation is completed. o To install Windows NT Mwave driver, you must have ThinkPad Feature program installed to set or change Mwave DSP resource setting. o In order to use MIDI, you must install MIDI sample files which are on separate diskettes. These MIDI sample diskettes are common diskette used for Window 3.1 or Windows 95. Installing Mwave driver for Windows NT -------------------------------------- To perform an installation of Mwave under Windows NT: - Place installation disk #1 in your disk drive - Select "RUN" from Program Manager's "File" menu - Type A:\SETUP in the OPEN window - Select "OK" or press Enter NOTE: For Windows NT, the DAA options diskette is not required. NOTE: Non-US users must run the Country Selection Application AFTER Mwave installation and reboot. Reboot again after running the Country Selection Application. NOTE: To support suspend/resume power management for Mwave features, ThinkPad Utility must be installed if your computer is 760C/ 760CD/760E/760ED. You must install ThinkPad Power Management Support Diskette if your computer is 755CE/CD/CX/CDV for suspend/resume function. NOTE: To run Mwave under Windows NT, your computer must have a minimum of 16 MB of RAM. Installing MIDI Samples in Windows NT ------------------------------------- In order to use MIDI, you must install the MIDI Samples. This is a separate installation. To install the Mwave MIDI Samples: - Insert the MIDI installation disk into "A" drive - Select "RUN" from Program Manger's "File" menu - Type A:\SETUP in the OPEN window - Select "OK" or press Enter - Respond "Yes" when asked if you wish to use the samples. - When the installation is complete, shutdown NT and reboot your computer 2.1.9.2 Configuring the Mwave modem ------------------------------------- After installing Mwave driver, you must configure the communication port number in order to assign the Mwave modem resources on Windows NT. Use your ThinkPad Feature program to select a COM port for the modem. Then, use the Windows NT Control Panel to define the same port. Follow these steps: 1. On 755 family ThinkPad, double click the DSP icon in ThinkPad Feature program. The DSP dialog box appears. On 760 family ThinkPad, double-click ThinkPad Features icon. The telephone icon appears. 2. Choose one of the COM ports shown in the Telephony Function box. A message appears if the COM port is already in use. 3. Choose the Save button. On 760 family, chose OK button to save the COM port enabled. 4. In the Main group, double-click the Control Panel icon. Then double-click the Ports icon. 5. Verify that the list of COM ports includes the COM port that you chose in your ThinkPad Feature. If not, choose the Add button. If the port is listed, double-click it. 6. On the Advanced Settings dialog box, choose settings as shown in the following table: BASE I/O COM PORT PORT ADDRESS IRQ COM1 03F8 4 COM2 02F8 3 COM3 03E8 4 COM4 02E8 3 We also recommend that you select the FIFO Enabled checkbox. 7. Choose the OK button. If you have made any changes, you must shut down and restart the com- puter in order for the changes to take effect. 2.1.9.3 Tips for Mwave/DSP Feature program -------------------------------------------- Some useful hints/limitations are fully documented in README.TXT of Windows NT Mwave install disk1. Read this document for the details. o Currently, the following features are not provided: - Speaker phone/answering machine - SoundBlaster game support - Class-1 FAX o Suspending during MIDI/WAVE play may not recover properly after the system is resumed. Discontinue MIDI/WAVE play prior to entering Suspend Mode. o Setting the music option playing with Pinball Game causes the game to play slowly. Avoid setting this option. o Read FAQs about the each specific modem application/FAX application/ multimedia applications for more details. These information are documented in README.TXT in Windows NT Mwave Install Disk 1. -------------------------------------------- 3.0. Known limitations with Windows NT 3.51 -------------------------------------------- o Currently, the following functions are not provided on Windows NT 3.51 - Infra-Red, IBM MPEG-II (ThinkPad 760CD/760ED), enhanced video function such as video overlay/video capture features are not supported. o Following are the special consideration required on Windows NT 3.51 - Suspend/Resume are not supported on ThinkPad 345C/370C. Power Management function is limited. Even if suspend/resume is supported on some other ThinkPad models, using Hibernation function is limited as follows: If Windows NT system partition is created with NTFS, hibernation is not supported. Another limitation is if system is booted using the hibernation file, PCMCIA slot is not powered on. Shutdown and restart Windows NT to use the PCMCIA card. - Battery life may become shorter depending on the memory size, and types of things you do with Windows NT. Since Windows NT does not support advanced power management functions such as CPU power saving function or idle detection. Pay attention to the fuel gauge to monitor the battery life during the operation. - When using audio feature on ThinkPad 365X/560 series, I/O address conflict may occur if Token Ring adapter card is used together. Change the base I/O address of either Token Ring card (A20h) or the the default audio device base I/O address (220h) using the ThinkPad Feature Program. - When ISA adapter card such as network adapter cards are used with IBM docking unit, disable unused system devices such as Mwave modem, IR port if available IRQ for the specific ISA card is constrained. On ThinkPad 760 family, the default configuration for the system device uses many IRQs that constrains using for the ISA cards in the docking unit. Recommended to use IRQ =7 if the default configuration is required when the ISA card is used, especially with IBM Dock-II. - The number of PCMCIA devices is limited. Supported PCMCIA devices are listed on the Microsoft Windows NT Hardware Compatibility List. - On all ThinkPad 760E series (760E/ED/EL/ELD), IRQ 15 can not be allocated for PCMCIA card because this IRQ is reserved for the internal use. Assign the different IRQ number for any PCMCIA card. - To use a PCMCIA card, it must be inserted in the PCMCIA slot before Windows NT is started. Inserting or removing the card after Windows NT is started is not supported. Only cold insertion for PCMCIA cards is activated. On ThinkPad 755CD/CDV, PCMCIA ATA storage cards are not recognized because the internal CD-ROM is used as the secondary IDE which conflicts with the resource allocated for PCMCIA IDE under Windows NT. When you use a PCMCIA Hard Disk Card on ThinkPad 760CD/760LD, it needs to disable CD-ROM/Second HDD at Ultra Bay. On ThinkPad 760E/ED/ELD/EL, PCMCIA ATA cards are not supported. - When Adaptec SlimSCSI (APA-1460)PCMCIA card is used on ThinkPad 760E family, IRQ 11 is allocated for SlimSCSI card. But IRQ 11 is also reserved as the default interrupt number for the PCI devices. To avoid the conflict of the interrupt number, change the default 1st IRQ (IRQ11) to IRQ15 on PCI Device Setup menu/Docking Station Advanced Setup menu using the ThinkPad Feature Program. - Windows NT supports IBM Dock-I, IBM Dock-II,IBM SelectaDock Base model 1 and IBM SelectaDock I or II. However, hot/warm docking is not supported. To use the device in the Docking station, you must only do cold docking for the docking devices. o On ThinkPad 760C/CD, the System Flash ROM which has the following part number does not work when Windows NT SVGA video driver is installed: ROM P/N : 91G1225 (dated 09/25/95) Check your System ROM part number by invoking EasySetup. If your ROM has this part number, it is required to update the System Flash ROM with the latest one. Flash ROM update diskettes will be available in BBS, DOSCSD, CompuServe. ************* END OF DOCUMENT ************************************************