=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= Fixes for Netfinity Manager/Client Services Version 5.20.0 Installation Instructions README file This README file contains information on downloading and installing Fixes for Netfinity Manager and Client Services for Netfinity Manager. =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= CONTENTS ________ 1.0 Download and extraction instructions. 2.0 List of fixes and installation instructions. 3.0 Trademarks and Notices =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 1.0 Download and extraction instructions. __________________________________________ The file containing the fixes is a self-extracting file. Place into a directory of your choosing and execute. When extracted the directory structure shown below will be created. NF5200 | US | +--NetWare | +--OS2 | +--Manager | +--Win95 | +--Manager | +--Windows | +--WINNT +--Manager Fixes are located in the directory for the named for the operating system under which they apply. Most fixes apply to both Netfinity Manager and Client Services. Any fixes for Manager only are found in the \Manager directory. 2.0 List of fixes and installation instructions. _________________________________________________ ********************************************************************** Problem description: Thresholds not surviving a system reboot when set via Event Scheduler. Applies to: Manager ONLY Operating System: OS/2, Win95, WINNT File(s): SCFMSDLL.DLL Installation: Replace file ********************************************************************** Problem description: Duplicate Update Connector Manager Icons appear after upgrading over 5.10.3 or 5.10.4 Applies to: Manager ONLY Operating System: WINNT File(s): BDSVCINI.EXE Installation: 1) Copy BDSVCINI.EXE to Netfinity directory, usually \WNETFIN 2) Go to a command prompt 3) Run BDSVCINI.EXE with the following parameters: DEL 1 1 CyberX CyberB.java CyberG.java SVCRESRC 6 46 3028 3128 3228 4) Shutdown and restart NETFBASE ********************************************************************** Problem description: File Transfer fails during directory transfer when target directory already exist Applies to: Client Services Operating System: NetWare File(s): FTBASE.NLM Installation: Replace file ********************************************************************** Problem description: NO VPD under NetWare on Netfinity 7000 Applies to: Client Services Operating System: NetWare File(s): SINFB30.NLM SYSTM002.NLM Installation: Unload NETFBASE, replace files, load NETFBASE ********************************************************************** Problem description: NO VPD under OS/2 on Netfinity 7000 Applies to: Manager & Client Services Operating System: OS/2 File(s): SINFB30.EXE SYSTM002.DLL Installation: Stop NETFBASE, replace files, start NETFBASE ********************************************************************** Problem description: SNMP service was not stopped, holding open NFNAME32.DLL and WNFIPC32.DLL. These files were not being updated during an install over. Applies to: Manager and Client Services Operating System: WINNT File(s): NETFINST.EXE Installation: Replace file ********************************************************************** Problem description: No doumentation indicating the command NFUNINST /R: will cause a removal Netfinity without user intervention. Applies to: Manager and Client Services Operating System: Win95, WINNT File(s): NFUNINST.EXE Installation: None ********************************************************************** Problem description: On a RAID system, when using WIN NT. Capacity Management does not plot a data point for DISK WORKLOAD monitors until the workload is held above 1mb long enough for the polling cycle. Applies to: Manager and Client Services Operating System: WINNT File(s): CMBASE.EXE Installation: Replace file ********************************************************************** Problem description: Win-OS2 programs not closing correctly after Netfinity is installed Applies to: Manager & Client Services Operating System: OS/2 File(s): EQNSEADA.EXE Installation: Replace file ********************************************************************** =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-==-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-= 3.0 Trademarks and Notices __________________________ The following terms are trademarks of the IBM Corporation in the United States or other countries or both: IBM Netfinity OS/2 DB2 IPX, Novell, and NetWare are trademarks of Novell, Incorporated. Lotus and Lotus Notes are trademarks of Lotus Development Corporation. Windows, Windows 95, Win32, and Windows NT are trademarks of Microsoft Corporation. DMI is a trademark of the Desktop Management Task Force. THIS DOCUMENT IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. IBM DISCLAIMS ALL WARRANTIES, WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE AND MERCHANTABILITY WITH RESPECT TO THE INFORMATION IN THIS DOCUMENT. BY FURNISHING THIS DOCUMENT, IBM GRANTS NO LICENSES TO ANY PATENTS OR COPYRIGHTS. Note to U.S. Government Users -- Documentation related to restricted rights -- Use, duplication or disclosure is subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.