Analog Turntable
1981
In its design very similar to the RS 100, the RS 200 offers a lot of the features and goodies the RS 100 lacks: a direct-driven chassis, full-automatic start and stop, a repeat function, a heavier turntable, and a better pickup system. The pickup carriers are 100% interchangeable between the RS 100 and RS 200.
The RS 200 was also available as RS 220 CX with a built-in CX decoder.
Full Automatic, direct-driven, automatic repeated play, pitch control, low-mass pickup system.
DIN (cable fixed to player)
(taken from user's manual)
| Turntable: | Aluminium, weight 1 kg |
| Pitch Control: | ± 4% |
| Variation of Speed: | 0.065% |
| S/N Ratio: | >=44dB |
| S/N Ratio (filtered): | >=67dB |
| Effective Arm Length: | 217 mm |
| Pickup Overhang: | 18 mm |
| Tangential Error Angle: | <= 0.18 deg/cm |
| Pickup System: | AT51 |
| Diamond: | Spherical, rounding 15 ± 2µm |
| Compliance: | 20µm/mN |
| Sensitivity: | 1.0mV per cm/s @ 1000 Hz |
| Mains Supply: | 110/220V changeable |
| Power Consumption: | approx. 6VA @ 220V/50Hz |
| Dimensions: | 433x350x130mm incl. cover |
| Weight: | approx. 6kg |
It's difficult to make a photo of it, but believe me: The RS 200's spindle bearing is extremely sensitive to mechanical shocks and easily breaks. Symptom of such a failure is a turntable that doesn't want to spin and is even hard to turn by hand. This mostly happens when the player is being shipped with the turntable not taken off: its weight of more than 1 kilogram gnerates such mechanical shocks that the bearing breaks apart. I have no clue how to fix this, and therefore you should always transport the RS 200 with the turntable taken off!!!
(taken from Telefunken's 1981-1991 Service Handbook and the Servie Manual)
| Cabinet Parts | ||
|---|---|---|
| Position | Order No. | Description |
| 1 | 339 026 106 | cabinet |
| 3 | 339 121 107 | front panel, complete |
| 4 | 339 211 109 | knob guide |
| 5 | 339 211 110 | knob guide |
| 10 | 339 271 106 | stroboscope window |
| 11 | 339 441 110 | push button assembly |
| 13 | 339 211 108 | push button |
| 14 | 339 216 106 | turn knob |
| 15 | 339 811 106 | start lever I |
| 16 | 339 811 107 | start lever II |
| 17 | 339 836 106 | repeat lever |
| 18 | 339 836 107 | select lever |
| 19 | 339 836 113 | adjust screw |
| 20 | 339 901 106 | spring for start lever |
| 21 | 339 901 107 | tension spring for start lever |
| 22 | 339 901 108 | pressure spring |
| 23 | 339 826 106 | switch rod |
| 24 | 339 826 107 | switch rod |
| 25 | 339 826 108 | switch rod |
| 26 | 339 811 114 | lift cam |
| 27 | 339 811 113 | shaft for lift cam |
| 29 | 339 826 109 | switch rod |
| 32 | 339 246 108 | tone arm, complete |
| 35 | 339 811 108 | lift rest |
| 36 | 339 811 109 | lift lever |
| 37 | 339 831 963 | nut |
| 38 | 339 916 955 | spring |
| 39 | 339 836 112 | lift shaft |
| 40 | 339 906 959 | pressure spring |
| 42 | 339 826 110 | switch lever |
| 43 | 339 901 109 | spring |
| 44 | 339 826 111 | guide lever |
| 45 | 339 241 106 | tone arm rest |
| 47 | 339 486 006 | tone cable |
| 50 | 339 871 107 | pull relief |
| 54 | 339 336 107 | power supply board, complete |
| 55 | 339 311 106 | mains transformer |
| 56 | 339 301 107 | motor, complete with control board |
| 59 | 339 011 107 | bottom plate |
| 60 | 339 061 107 | foot |
| 61 | 339 851 106 | rubber bushing |
| 62 | 339 256 106 | dust cover rest |
| 63 | 339 266 106 | slide piece |
| 64 | 339 056 106 | hinge, right |
| 65 | 339 056 107 | hinge, left |
| 66 | 339 056 108 | cover cap |
| 67 | 339 056 109 | shaft |
| 68 | 339 901 112 | pin |
| 69 | 339 901 113 | spring |
| 70 | 339 111 106 | dust cover |
| 72 | 339 251 953 | turntable |
| 73 | 339 256 953 | turntable mat |
| 74 | 339 266 950 | centering piece |
| 77 | 339 441 957 | micro switch |
| 78 | 339 481 450 | power cord |
| 79 | 339 441 113 | speed control board, complete |
| 80 | 339 501 108 | variable resistor 4.7 KOhm |
| 81 | 339 336 109 | LED PCB |
| 82 | 339 529 344 | LED AA-5534 S |
| 83 | 339 421 106 | angle |
| 84 | 339 036 106 | chassis, complete |
| 85 | 339 826 112 | clutch lever |
| 86 | 339 906 106 | spring for clutch lever |
| 87 | 339 906 107 | spring |
| 88 | 339 811 110 | switch lever |
| 90 | 339 811 111 | repeat lever |
| 91 | 339 811 112 | start lever |
| 92 | 339 901 106 | spring for start lever |
| 93 | 339 806 106 | main gear, complete |
| 94 | 339 911 106 | torsion spring |
| 95 | 339 826 113 | select guide |
| 96 | 339 906 108 | spring |
| 97 | 339 826 115 | select lever |
| 98 | 339 901 110 | pull spring |
| 99 | 339 831 106 | switch lever |
| 100 | 339 826 114 | rotary lever, complete |
| 101 | 339 906 109 | spring |
| 102 | 339 851 107 | friction rubber |
| 103 | 339 906 110 | friction spring |
| 319 461 315 | service information | |
| 559 338 011 | pickup carrier ATN 51 | |
| 559 318 012 | magnetic system AT 51D |
Back to List